18W Constant Current TRIAC Dimmable Driver
18W Constant Current TRIAC Dimmable Driver
Dimming is Modern technology to control the intensity of light by varying the input or by providing an external signal. The dimmable LEDs driver can be dimmed down to 10% to the rated output.
$0.00
Ex Tax: $0.00
- Stock: In Stock
- Model: PI-13-XD-115A
Technical Specifications
General | |
Termination ( Applicable for Potted Model only) | WIRES i/p: Brown(L), Blue(N), o/p wires: Red(+),Black(-), Orange(0-10v), White(Gnd), DALI1, DALI2 (According to Model) |
HV Test Across Shorted I/P and O/P | 2KV |
Surge (Type Test) | ± 2 kV |
Isolation Between I/P and O/P | Available |
Termination | PCB Mounted Screw Terminal |
PCB Type | GLASS EPOXY |
Packing | INDIVIDUAL DRIVER WRAPPED IN TR |
Output | |
Rated Current | 350mA |
Rated Power | 15 W |
Current Tolerance | +/- 5% |
Voltage Tolerance | +/- 5% |
Line Regulation | +/- 5% |
Load Regulation | +/- 5% |
Ripple V/I | 3.8 Vp-p |
Input (at Full Load @240 Vac) | |
Supply Volts (Vn) | 240 VAC |
Supply Current (in) | 85 mA |
Watt (Pn) | 19 W |
Current Crest Factor | <1.7 |
Current THD % | <25% |
Inrush Current | 5.8 A @ 25 µsec |
Efficiency | >80% |
Dimming Control | |
Dimming Option | AT 10V SIGNAL – 100% OF OUTPUT CURRENT, AT 0V SIGNAL – 0% OF OUTPUT CURRENT, DALI SIGNAL VOLT -11.5 TO 22V (TYPICAL 16V) |
Dimming Signal | ANALOG DIMMING CURRENT <1mA, DALI DIMMING CURRENT <2mA |
Protection | |
O/P Over Voltage | Available |
I/P Over Voltage | NA |
Overload | Available |
Short Circuit | Available |
I/P Fuse | Available |
Reverse Polarity | Available |
Thermal Cutoff | Available |
Physical Characterstics | |
Dimension (L*W*H) ( Applicable for Potted Model only) | 90(L)X42(W)X30(H)mm (+20mm length extra for Side Caps) |
Maximum Temp. Tc (*2) | 80°C |
Weight in Casing (Gms) | 95 |
Driver Shape | Rectangular |
Dimension (L x W x H) | 84.41 X 39.47 X 22 mm |
Dimension - With Casing | 115 X 43 X 28 mm |
Weight (in gram) | 65 |
Operating Ambient Temperature (ta) | -10°C TO + 70°C |
Weight in CASING (Gms) ( Applicable for Potted Model only) | 165 |
Center to Center Dimension (Driver Casing) | 101 X 42 X 28 mm |
Power Details | |
Input Voltage | 27-42 VDC |
Output Voltage | 145-277 VAC |
Power Consumption | 42 VDC |
Power Factor | >0.9 |
Safety and EMC (Type Test) | |
Safety Standard | IEC 61347-2-13 |
Insulation Resistance | >500M OHM@1000VDC |
EMC Emission | Compliance to EN61000-3-3 |
EMC Immunity | Compliance to EN61000-4-2,3,4,5,6,8,11 |
Reliability Test (Type Test) | |
Low Voltage Test | OK |
High Voltage Test | OK |
Temperature Test | 60°C, 1 MONTH |