Menu
Your Cart

30W Constant Current TRIAC Dimmable Driver

30W Constant Current TRIAC Dimmable Driver
30W Constant Current TRIAC Dimmable Driver

Dimming is Modern technology to control the intensity of light by varying the input or by providing an external signal. The dimmable LEDs driver can be dimmed down to 10% to the rated output.

$0.00
Ex Tax: $0.00
  • Stock: In Stock
  • Model: PI-13-FD-227A

Technical Specifications

General
HV Test Across Shorted I/P and O/P2KV
Surge (Type Test)± 2 kV
Isolation Between I/P and O/PAvailable
TerminationTERMINALS
PCB TypeFR4
Output
Electrical Performance Range220-240 VAC
Rated Current0.650A
Rated Power27 W
Current Tolerance+/- 5%
Voltage Tolerance+/- 5%
Line Regulation+/- 5%
Load Regulation+/- 5%
Ripple V/I<5%/<30%
Input (at Full Load @240 Vac)
Supply Volts (Vn)240 VAC
Supply Current (in)152 mA AC
Watt (Pn)33 W
Current Crest Factor<1.7
Current THD %NA
Inrush Current4.9 A @ 18 µsec
Efficiency>80%
Protection
O/P Over VoltageAvailable
I/P Over VoltageNA
OverloadAvailable
Short CircuitAvailable
I/P FuseAvailable
Reverse PolarityAvailable
Thermal CutoffAvailable
Physical Characterstics
Dimension (L*W*H) ( Applicable for Potted Model only)90(L)X41.7(W)X30(H)mm (+20mm length extra for Side Caps)
Maximum Temp. Tc (*2)70°C
Weight in Casing (Gms)126
Driver ShapeRectangular
Dimension (L x W x H)100 X 64 X 26 mm
Dimension - With Casing102.55 X 66 X 30.3 mm
Weight (in gram)90
Operating Ambient Temperature (ta) -10°C TO + 50°C
TC Life65°C
Weight in CASING (Gms) ( Applicable for Potted Model only)170
Center to Center Dimension (Driver Casing)94.2 X 57.7 mm
Power Details
Input Voltage27-42 VDC
Output Voltage220-270 VAC
Power Consumption42 VDC
Power Factor>0.9
Safety and EMC (Type Test)
Safety StandardIEC 61347-2-13
Insulation Resistance>500M OHM@1000VDC
EMC EmissionCompliance to EN61000-3-3
EMC ImmunityCompliance to EN61000-4-2,4,5,11
Reliability Test (Type Test)
Low Voltage TestOK
High Voltage TestOK
Temperature Test60°C, 1 MONTH