Menu
Your Cart

9.1W Constant Current TRIAC Dimmable Driver

9.1W Constant Current TRIAC Dimmable Driver
9.1W Constant Current TRIAC Dimmable Driver

Dimming is Modern technology to control the intensity of light by varying the input or by providing an external signal. The Dimmable LED drivers can be dimmed down to 0-1% to the rated output.

Аs the LED lighting market matures, there is an increasing need to соntrоl the light оutрut of LED fixtures. Pyrotech offers а wide selection of dimming орtiоns including Triас, Analog 0-10V (Dim to Off), and РWM. Our dimmable LED роwer suррlies аre соmmоnly used in many LED indооr аnd оutdооr lighting аррliсаtiоns suсh аs, LED hоrtiсulturаl lighting, LED residentiаl lighting, LED street lаmрs, LED signаge, LED deсоrаtive аnd аrсhiteсturаl lighting, LED theаtre/stаge lighting, LED embedded lighting аnd LED lаrge sсreen disрlаys.

$0.00
Ex Tax: $0.00
  • Stock: In Stock
  • Model: PI-13-FD-209A

Technical Specifications

General
Termination ( Applicable for Potted Model only)WIRES – I/P Blue (N), Brown(L), O/P- Red(+), Black(-)
HV Test Across Shorted I/P and O/P2KV
Surge (Type Test)± 2 kV
Isolation Between I/P and O/PAvailable
TerminationPCB Mounted Screw Terminal
PCB TypeCEM1
Output
Electrical Performance Range220-240 VAC
Rated Current0.700 A
Rated Power9.1 W
Current Tolerance+/- 5%
Voltage Tolerance+/- 5%
Line Regulation+/- 5%
Load Regulation+/- 5%
Ripple V/I<5%/<30%
Product Details
Touch DimSupport
Input (at Full Load @240 Vac)
Supply Volts (Vn)230 VAC
Supply Current (in)100 mA
Watt (Pn)12W
Current Crest Factor<1.7
Current THD %NA
Inrush Current7.8 A @ 18 µsec
Efficiency>73%
Dimming Control
Dimming OptionTRIAC PHASE CUT DIMMING (Suitable for Leading Edge dimmers)
Dimming SignalDIMMING RANGE: 100% to 20%
Protection
O/P Over VoltageAvailable
I/P Over VoltageNA
OverloadAvailable
Short CircuitAvailable
I/P FuseAvailable
Reverse PolarityAvailable
Thermal CutoffAvailable
Physical Characterstics
Dimension (L*W*H) ( Applicable for Potted Model only)90(L)X41.7(W)X30(H)mm (+20mm length extra for Side Caps)
Maximum Temp. Tc (*2)70°C
Weight in Casing (Gms)95
Driver ShapeRectangular
Dimension (L x W x H)85 X 39 X 22 mm
Dimension - With Casing115 X 43 X 28 mm
Weight (in gram)65
Operating Ambient Temperature (ta) -10°C TO + 50°C
TC Life65°C
Weight in CASING (Gms) ( Applicable for Potted Model only)165
Center to Center Dimension (Driver Casing)108 X 45 X 28 mm
Power Details
Input Voltage9-13 VDC
Output Voltage220-240 VAC
Power Consumption13 VDC
Output Current700mA
Power Factor>0.5
Safety and EMC (Type Test)
Safety StandardIEC 61347-2-13
Insulation Resistance>500M OHM@1000VDC
EMC EmissionCompliance to EN61000-3-3
EMC ImmunityCompliance to EN61000-4-2,4,5,11
Reliability Test (Type Test)
Low Voltage TestOK
High Voltage TestOK
Temperature Test60°C, 1 MONTH