PI-14-XD-11075A
PI-14-XD-11075A
$0.00
Ex Tax: $0.00
- Stock: In Stock
- Model: PI-14-XD-11075A
Technical Specifications
| General | |
| Termination ( Applicable for Potted Model only) | CABLE i/p: Brown(L), Blue(N), Yellow(E) CABLE o/p: Red(+), Black(-), Orange (0-10v), White(gnd), DALI1, DALI2 (According to Model) |
| HV Test Across Shorted I/P and O/P | 1.5 KV |
| Surge (Type Test) | ± 2.5 kV |
| Isolation Between I/P and O/P | Available |
| Termination | PCB Mounted Screw Terminal |
| PCB Type | GLASS EPOXY |
| Packing | 500 PCS. PER BOX |
| Output | |
| Rated Current | 6.25 A |
| Rated Power | 75 W |
| Voltage Tolerance | +/- 5% |
| Line Regulation | +/- 5% |
| Load Regulation | +/- 5% |
| Ripple V/I | 2 Vp-p |
| Input (at Full Load @240 Vac) | |
| Supply Volts (Vn) | 225 VAC |
| Supply Current (in) | 0.91A/170VAC, 0.7A/220VAC, 0.62A/250VAC |
| Watt (Pn) | 89 W |
| Current Crest Factor | <1.7 |
| Current THD % | <15% |
| Inrush Current | 6.5 A @ 25 µsec |
| Efficiency | >80% |
| Dimming Control | |
| Signal Current Per Fixture | DALI DIMMING CURRENT <2mA |
| Dimming Option | TRIAC PHASE CUT DIMMING (Suitable for Leading Edge dimmers) |
| Dimming Signal | DIMMING RANGE: 100% to 15% |
| Protection | |
| O/P Over Voltage | Available |
| I/P Over Voltage | Available |
| Overload | Available |
| Short Circuit | Available |
| I/P Fuse | Available |
| Reverse Polarity | Available |
| Thermal Cutoff | Available |
| Physical Characterstics | |
| Dimension (L*W*H) ( Applicable for Potted Model only) | 210(L)X70(W)X43(H)mm (+20mm length extra for Side Caps) |
| Maximum Temp. Tc (*2) | 90°C |
| Weight in Casing (Gms) | 440 |
| Driver Shape | Rectangular |
| Dimension (L x W x H) | 180 X 49 X 33 mm |
| Dimension - With Casing | 207 X 54 X 38 mm |
| Weight (in gram) | 400 |
| Operating Ambient Temperature (ta) | -10°C TO + 50°C |
| Weight in CASING (Gms) ( Applicable for Potted Model only) | 510 |
| Power Details | |
| Input Voltage | 0-6.25 A |
| Output Voltage | 220-240 VAC |
| Power Consumption | 12 VDC |
| Power Factor | >0.5 |
| Safety and EMC (Type Test) | |
| Safety Standard | IEC 61347-2-13 |
| Insulation Resistance | >500M OHM@1000VDC |
| EMC Emission | Compliance to EN55015, EN61000-3-3 |
| EMC Immunity | Compliance to EN61000-4-2,3,4,5,6,8,11 |
| Reliability Test (Type Test) | |
| Low Voltage Test | OK |
| High Voltage Test | OK |
| Temperature Test | 70°C, 1 MONTH |