MCP (MANUAL CALL POINT)
![MCP (MANUAL CALL POINT) MCP (MANUAL CALL POINT)](https://static.peplelectronics.com/image/cache/catalog/products/Fire%20Alarm/MCP-(Manual-Call-Point)-550x550.jpg)
The PY-MCP-204A Addressable Manual Call point uses a non-breakable glass that is designed to press under light pressure triggering the call point into an alarm condition, with an LED indicator mounted onto the front face to simplify the location of an operated call point. Safe to press and no hammer is required. The protected flap on the lower part is used for resetting through the supplied special tool.
In the event of a fire, once it is pressed, the LED goes on indicating the call point status and parallel sending a communication signal to the control panel. The PY-MCP-204A manual call point is compatible with the PY-CP-4A Analogue Intelligent Fire Alarm Control Panel, produced by single manufacturer PEPL, to avoid addressable communication compatibility problems.
Features
- Using microprocessor technology
- Digital Addressing
- Non-breakable glass and hammerless
- Safe to operate and easy to reset
- Semi-flash Mounted, indoor application
- Stock: In Stock
- Model: PY-MCP-204A
Technical Specifications
Power Rating | |
Current Consumption Standby | 0.6mA, Alarm: 1.8mA |
Input Voltage | 24VDC [16V to 28V] |
Module | |
Dimension / LWH | 89mm x 93mm x 35mm |
Humidity | 0 to 95% Relative Humidity, Non condensing |
Indicator Status | Single LED/ Steady On-when pressed |
Ingress Protection Rating | IP43 |
Material / Colour | Fireproof ABS/ RED Glossy finishing |
Operating Temperature | -10°C to +55°C |
Protocol/ Addressing | Private, Value range from 1 to 254 |
Weight | 102g (with Base), 80g (without Base) |