25W Constant Current TRIAC Dimmable Driver
25W Constant Current TRIAC Dimmable Driver
Dimming is Modern technology to control the intensity of light by varying the input or by providing an external signal. The Dimmable LED drivers can be dimmed down to 0-1% to the rated output.
Аs the LED lighting market matures, there is an increasing need to соntrоl the light оutрut of LED fixtures. Pyrotech offers а wide selection of dimming орtiоns including Triас, Analog 0-10V (Dim to Off), and РWM. Our dimmable LED роwer suррlies аre соmmоnly used in many LED indооr аnd оutdооr lighting аррliсаtiоns suсh аs, LED hоrtiсulturаl lighting, LED residentiаl lighting, LED street lаmрs, LED signаge, LED deсоrаtive аnd аrсhiteсturаl lighting, LED theаtre/stаge lighting, LED embedded lighting аnd LED lаrge sсreen disрlаys.
$0.00
Ex Tax: $0.00
- Stock: In Stock
- Model: PI-13-FD-120A
Technical Specifications
| General | |
| Termination ( Applicable for Potted Model only) | WIRES – I/P Blue (N), Brown(L), O/P- Red(+), Black(-) |
| HV Test Across Shorted I/P and O/P | 2KV |
| Surge (Type Test) | ± 2 kV |
| Isolation Between I/P and O/P | Available |
| Termination | PCB Mounted Screw Terminal |
| PCB Type | FR4 |
| Output | |
| Electrical Performance Range | 220-240 VAC |
| Rated Current | 0.350 A |
| Rated Power | 25 W |
| Current Tolerance | +/- 5% |
| Voltage Tolerance | +/- 5% |
| Line Regulation | +/- 5% |
| Load Regulation | +/- 5% |
| Ripple V/I | <5%/<30% |
| Product Details | |
| Touch Dim | Support |
| Input (at Full Load @240 Vac) | |
| Supply Volts (Vn) | 240 VAC |
| Supply Current (in) | 210mA |
| Watt (Pn) | 31 W |
| Current Crest Factor | <1.7 |
| Current THD % | NA |
| Inrush Current | 7.9 A @ 20 µsec |
| Efficiency | >80% |
| Dimming Control | |
| Dimming Option | TRIAC PHASE CUT DIMMING (Suitable for Leading Edge dimmers) |
| Dimming Signal | DIMMING RANGE: 100% to 20% |
| Protection | |
| O/P Over Voltage | Available |
| I/P Over Voltage | NA |
| Overload | Available |
| Short Circuit | Available |
| I/P Fuse | Available |
| Reverse Polarity | Available |
| Thermal Cutoff | Available |
| Physical Characterstics | |
| Dimension (L*W*H) ( Applicable for Potted Model only) | 90(L)X41.7(W)X30(H)mm (+20mm length extra for Side Caps) |
| Maximum Temp. Tc (*2) | 80°C |
| Weight in Casing (Gms) | 110.87 |
| Driver Shape | Rectangular |
| Dimension (L x W x H) | 85 X 39 X 22 mm |
| Dimension - With Casing | 115 X 43 X 28 mm |
| Weight (in gram) | 76.33 |
| Operating Ambient Temperature (ta) | -10°C TO + 50°C |
| TC Life | 70°C |
| Weight in CASING (Gms) ( Applicable for Potted Model only) | 170 |
| Center to Center Dimension (Driver Casing) | 104.9 X 34 X 28 mm |
| Power Details | |
| Input Voltage | 44-70 VDC |
| Output Voltage | 220-240 VAC |
| Power Consumption | 70 VDC |
| Output Current | 210 mA |
| Power Factor | >0.9 |
| Safety and EMC (Type Test) | |
| Safety Standard | IEC 61347-2-13 |
| Insulation Resistance | >500M OHM@1000VDC |
| EMC Emission | Compliance to EN61000-3-3 |
| EMC Immunity | Compliance to EN61000-4-2,4,5,11 |
| Reliability Test (Type Test) | |
| Low Voltage Test | OK |
| High Voltage Test | OK |
| Temperature Test | 60°C, 1 MONTH |