UV FLAME DETECTOR
UV FLAME DETECTOR
The device is an Ultraviolet-only flame detector designed to detect fires and provide alarm outputs directly from the detector while maintaining false alarm immunity. It detects in the ultraviolet (UV) spectral range for optimized speed of response.
It is fast and capable of detecting the ultraviolet (UV) rays emitted by a burning substance and is used in high hazard applications such as petrochemical plants, munitions factories, and other areas where flammable or explosive liquids or solids are handled or stored.
Features
- With qualities of highly sensitive, reliable, dust-resistant, corrosion-proof, and moisture-resistant.
- The flame sensor adopts an ultraviolet photosensitive tube.
- Therefore is not sensitive to sunlight, dust, oil, tolerance of fume, and humidity.
- Set in a standard calibration to detect flames at a distance of 25 meters.
- Which flame was created by 2Kg ethanol in a Container of Base 33cmX33cm Height 5cm.
$0.00
Ex Tax: $0.00
- Stock: In Stock
- Model: UV Flame Detector
Technical Specifications
| Product Details | |
| Alarm Current | ≤30 mA @ 24 VDC |
| Alarm Status | LED-lit steady |
| Detection Angle | 110 degree |
| Detection Sensitivity | Grade I, 25m@flame (Container 33cmX33cm, Height 5cm with 2Kg ethanol) |
| Normal Status | LED blinking in 5 seconds interval |
| Operating Humidity Range | 10% to 93% Relative Humidity, Non-condensing |
| Relay Contact Load | 1A@DC24V |
| Spectrum | 180~290nm |
| Operating Temperature (°C) | 10°C to 50°C (14°F to 122°F) |
| Input (at Full Load @240 Vac) | |
| Operating Voltage Range | 12 to 30 VDC Volts |
| Technical Details | |
| Standby Current | ≤10 mA @ 24 VDC |
| Protection | Rating IP 32 |