Menu
Your Cart

Transducers

Pyrotech's Electrical Transducers convert various electrical power line parameters viz. Voltage, Current, Frequency, Power Factor, Active power, Reactive power, Apparent power into DC current or voltage output. The output of transducer is independent of load impedance. These are used in various electrical, thermal, chemical & other power plants to monitor processed data locally.

Technical Highlights

  • 0.2 accuracy class
  • Open & short circuit protection
  • Two galvanically isolated Outputs
  • Standard DC Current & voltage output are independent of load impedance
  • DIN-RAIL mounting
  • PGCIL, NTPC approved

Features

  • Confirms to IEC 688
  • Ripple : Max 0.5% of span
  • Response Time < 300 msec.
  • Dielectric Test : 4 kv RMS for 1 minute
  • Impulse Voltage : 5 kV 1.2/50 psec

Application

  • Substation, Generators & Industries
  • For factory & building automation
  • Sub-billing in malls
  • Power Monitoring of DG Set & Motors
Product Compare0
Active power transducer
Model: Active power transducer
Active power transducer
Active power transducer measure AC power directly or through voltage and/or current transformers. The transducer converts the AC power signal to either a DC mA or DC voltage output directly proportional to the input signal value. Models are available for single-phase and three-phase, balanced and un..
$0.00
Ex Tax:$0.00
Compare this Product
Current transducer
Model: Current transducer
Current transducer
Pyrotech's Current Transducer is used for the measurement of AC current. Current transducer is very reliable and efficient for measurement of AC current. It provides 4 to 20 mA or 0 to 20mA DC output FeaturesAccuracy class 0.25 Isolated DC mA or DC voltage output Adjustable 'span' and 'ze..
$0.00
Ex Tax:$0.00
Compare this Product
Frequency transducer
Model: Frequency transducer
Frequency transducer
Pyrotech's Frequency transducers measure frequency either directly or through a voltage transformer. The transducer converts the AC frequency signal to either a DC mA or DC voltage output which is directly proportional to the input signal value. The output is directly proportional to the frequency d..
$0.00
Ex Tax:$0.00
Compare this Product
MFPT
Model: MFPT
MFPT
Pyrotech's make MFPT is specifically designed for measuring AC power line parameters, like voltage, current, wattage, energy, var, power factor & frequency etc (over 90 parameters measured). This single unit can replace all the discrete single transducers. Besides giving data on RS485/RS232 bus,..
$0.00
Ex Tax:$0.00
Compare this Product
Reactive power transducer
Model: Reactive power transducer
Reactive power transducer
Active power transducers measure AC power either directly or through voltage and/or current transformers. The transducer converts the AC power signal to either a DC mA or DC voltage output which is directly proportional to the input signal value. Models are available for single phase and three phas..
$0.00
Ex Tax:$0.00
Compare this Product
Tap position transducer
Model: Tap position transducer
Tap position transducer
Pyrotech's Tap Position Transducers are highly accurate, cost effective and compact. These are available in Dinrail mounted version. It receives “resistance” input corresponding to tap position transducer and gives 4-20 mA output signal, that is galvanically and optically isolated. The output signal..
$0.00
Ex Tax:$0.00
Compare this Product
Voltage transducer
Model: Voltage transducer
Voltage transducer
Voltage transducers measure AC voltage either directly or through a voltage transformer. The transducer converts the AC voltage signal to either a DC mA or DC voltage output which is directly proportional to the input signal value. The 4kV isolated output signals can then be fed to analogue meters, ..
$0.00
Ex Tax:$0.00
Compare this Product
Showing 1 to 7 of 7 (1 Pages)